Performance Evaluation of Energy-Saving Solutions For a Thermal Oil-Based Drying System with a Capacity of 1000 Kg/Batch
Abstract
Energy losses in sliced fruit-drying systems employing thermal-oil heaters constitute a critical technical challenge, with measurable impacts on both operational efficiency and environmental performance. This study provides a quantitative assessment of three principal mitigation strategies: 1. Recovery of waste heat from flue gas via installation of an air preheater (APH); 2. Enhancement of insulation and thermal protection; 3.Optimization of the combustion process. When these feasible measures (Solutions 1, 2, and 3) are implemented concurrently, the overall thermal efficiency of the heater can be improved from 87.84% to 95.27%. Building on these results, This study investigates outlines an integrated implementation pathway aimed at maximizing energy utilization efficiency and strengthening the economic performance of fruit-drying operations.
References
[1] Nguyen Hay (2009), Drying Machines and Equipment. Science and Technology Publishing House.
[2] Tran Van Phu (2008), Drying Technology. Education Publishing House.
[3] Hoang Van Chuoc (2004), Drying Technology. Hanoi: Science and Technology Publishing House.
[4] Hoang Dinh Tin (2006), Heat Transfer and Heat Exchanger Design Calculations. Science and Technology Publishing House.
[5] Pham Le Dan and Tran Van Te (2006), Boilers and Thermal Networks. Science and Technology Publishing House.
[6] Y. A. , Çengel and M. A. Boles, Thermodynamics: An Engineering Approach . (9th ed.). McGraw-Hill Education., 2019.
[7] R. Saidur, J. U. Ahamed, and H. H. Masjuki, “Energy, exergy and economic analysis of industrial boilers,” Energy Policy, vol. 38(5), pp. 2188–2197, 2010.
[8] V. H. , G. S. D. , & R. A. P. Jogdand, “Energy and Exergy Analysis of Thermal Oil Heater,” International Journal of Engineering Research & Technology (IJERT), vol. 6(5), pp. 67–71, 2017.
[9] Le Dinh Kha (2020), Research, design, and development of a sliced fruit drying system using thermal oil furnace technology with IoT-based control and monitoring.
[10] Nguyen Bin (2003), Heat Transfer and Heat Exchanger Design Calculations. Science and Technology Publishing House.
[11] Nguyen Van Du (2011), Experimental Design in Engineering.
[12] Ngo Quang Tu and Truong Duy Nghia (2020), Techno-economic analysis of a cogeneration system using waste heat from clinker kiln exhaust gas. Journal of Science and Technology – University of Da Nang, vol. 18(5.1), pp. 21–25.
[13] Le Anh Duc (2015), Study on energy-saving solutions for industrial boilers. Master’s Thesis, Ho Chi Minh City.
[14] Hoang Ngoc Dong (2010), Some energy-saving solutions for industrial boilers, vol. 2.
[15] R. , A. J. U. , & M. H. H. Saidur, “Energy, exergy and economic analysis of a steam boiler,” International Journal of Mechanical and Materials Engineering, vol. 5(2), pp. 218–225, 2010.
[16] Vietnamese Standard (2019), TCVN 8630:2019.
[17] D. Kaya and M. Eyidogan, “A review on the techno-economic analysis of waste heat recovery projects for different types of flue gases,” Energy Convers Manag, vol. 74, pp. 469–478, 2013.